KL-FGPA-LED-TW

Tunable White KL LED Plenum Access Troffers

Tunable White 2x4 High Efficiency LED Luminaires with Plenum Access
  • Rated IP66
  • Suitable for ISO 3-9 Cleanspaces
  • Suitable for 209E class 1-100,000
  • Cleanspaces
  • ETL listed for Wet Locations
  • One piece overlapping doorframe
  • Robotically seam welded housing
  • Tunable White 2700k – 6500k CCT
  • Available With DALI Or 0-10V Controls
  • Access to plenum space using sealed access panel in housing
  • One Housing Suitable for Flange and Grid Installation
  • Made in the USA by a Family Owned US Corporation

Product Details

The correlated color temperature (CCT) of white light determines how the light is perceived by the human eye. The terms warm and cool are frequently used when discussing the CCT of a light source. Warm lights, typically on the lower end of the Kelvin degree scale (K), are similar to candle light or the incandescent lights that were prominent for decades. These lights, which range from 1,800K to 3,000K have a yellow to orange glow that creates a warm impression.  On the other end of the spectrum are the cool lights colors, which can reach 7,000K and sometimes deliver a blueish color. These colors at the higher end are often referred to as daylight.

Many light sources are manufactured with the ability to provide lamination at only one temperature range. Tunable luminaires provide the ability to adjust the CCT in real time to meet the needs of any applications.

In cleanroom environments, the numerous research and analysis functions that occur can require the light color to be adjusted to obtain the most accurate results. Tunable white light fixtures assist with this need in these demanding conditions. Laboratories also can require the circadian features that tunable light provide.

The Kurtzon KL-FGPA-LED-TW is a High Efficiency LED Luminaire designed for plenum access. It is available in 1×4 or 2×4 dimensions and is suitable for ISO 3-9 clean spaces and 209E class 1-100,000 clean spaces. Dual channel programmable drivers allow for color tuning of the white LED to achieve a desired color between 2700K and 6500K. The housing is one piece, hole free, robotically seam welded with flattened knockouts for a superior seal, and the door is a one-piece frame with welded corners overlaps the fixture allowing the NSF approved microcellular gasket to seal to the mounting surface. The fixture has a gloss white high reflectance 1000 hr. salt spray polyester powder coat finish.

The troffer is also IP66 rated for dust and water ingress, and suitable for 1700 PSI high pressure hose downs. It is ETL listed per UL_1598 for wet locations and Chicago Plenum Rated.